Revolution Series Two-Stage Water-to-Water Geothermal System

Revolution wt
Revolution
Warranty badge

Hydron Module Water-to-Water geothermal heating and cooling systems can deliver hydronic heat through radiant floor systems or forced air fans. Radiant heating and cooling creates a consistent room temperature with no moving air, eliminating the less comfortable aspects of forced air systems.

Applications

Radiant Heat Hot Water: Pool Conditioning Snow Melt

Features

  • Optional cupronickel heat exchanger
  • Desuperheater with internal pump
  • High and low access ports
  • Thermostatic expansion valve
  • Electronic controls with safety lockout
  • Front, top & rear access
  • Copeland scroll compressor

Performance Data

WT036

Cooling
Full Load BTU
42,000
EER
16.0
Part Load BTU
33,300
EER
20.6
Heating
Full Load BTU
36,400
COP
3.0
Part Load BTU
29,200
COP
3.1

WT048

Cooling
Full Load BTU
49,400
EER
15.1
Part Load BTU
38,800
EER
19.2
Heating
Full Load BTU
44,100
COP
3.0
Part Load BTU
35,700
COP
3.1

WT060

Cooling
Full Load BTU
57,800
EER
14.6
Part Load BTU
46,100
EER
18.1
Heating
Full Load BTU
53,200
COP
3.0
Part Load BTU
44,400
COP
3.1

WT092

Cooling
Full Load BTU
100,200
EER
15.2
Part Load BTU
75,700
EER
18.6
Heating
Full Load BTU
92,400
COP
3.1
Part Load BTU
72,200
COP
3.1

WT120

Cooling
Full Load BTU
114,800
EER
15.4
Part Load BTU
0
EER
0.0
Heating
Full Load BTU
97,400
COP
2.8
Part Load BTU
0
COP
0.0

WD120

Cooling
Full Load BTU
104,600
EER
14.5
Part Load BTU
63,500
EER
19.8
Heating
Full Load BTU
100,100
COP
2.8
Part Load BTU
57,500
COP
3.4
  • For the source water loop, open loop models use 1" fittings.
  • Rated in accordance with ISO Standard 13256-2 which includes Pump Penalties.
  • Heating capacities based on 32°F EST & 104°F ELT.
  • Cooling capacities based on 77°F EST & 53.6°F ELT.
  • Entering load temperature over 120°F heating and under 45°F Cooling is not permissible.
  • Floor heating is most generally designed for 85°F entering load temperature.

Literature

Accessories

"A" coil (hydronic)

Hydronic a coil

The specially matched "A" coil allows the split geothermal system to be added to an existing air handler or furnace in retrofit applications. Additionally, the "A" coil can allow the system to operate in a dual-fuel application where backup heat is supplied by a traditional furnace.

Air handler (hydronic)

Air handler

These multi-positional air handlers are specially matched to our split systems for maximum performance. The match also qualifies the system for the 30% U.S. federal tax credit. The air handler can be installed in remote parts of the home, or hard to reach areas where space is at a premium.

Programmable thermostat

Programmable thermostat

Keeps the home more comfortable by operating the unit on a set schedule and temperature range. This also saves on energy costs by setting the unit back while the home is unoccupied.

Non-programmable thermostat

Non programmable thermostat

Designed to take maximum advantage of the multi-stage functionality of the unit. This allows the unit to achieve maximum savings by only operating at the right range to match the current weather.

Flow centers - pressurized

Pressurized flow center

Circulates the fluid through the unit and the geothermal loop field. These types form a completely closed system.

Unit air pad (plastic or foam)

Air pad

The unit air pad creates a buffer between the unit and the home. This buffer prevents any vibration from the unit to be transmitted into the home which improves the already quiet operation of the unit.

Consumer purchase plans

Purchase plan

With a wide variety of payment options and terms, our consumer payment plans make installing a geothermal system easier and more cost effective. By deferring your initial payments out, you can start enjoying your new system earlier and take time to obtain many of the various rebates and tax credits offered.

Disposable pleated filter

Pleated filter

This type of filter uses a pleated media to remove dust and other particles from the air stream. It is important to check these filters regularly and replace them as needed.

Electrostatic filter (washable)

Electrostatic filter

This type of filter is a permanent media filter that can be washed from time to time as needed. This eliminates the need to buy new filters.

Electronic 24 volt air cleaner

24v electrostatic filter

This type of filter uses an electrically charged media to increase filtration performance. This improves indoor air quality by removing more particles from the airstream. This filter requires the occasional media replacement.

EWC zone control

Zone control

These highly sophisticated controls work with dampers in the ductwork to create multiple zones throughout the house. You can utilize one unit, but have different temperatures in each zone. The control panel controls both the unit, and the zone dampers.

Flow center - non-pressurized

Non pressure flow center

Circulates the fluid through the unit and the geothermal loop field. This type of system uses an expansion tank that can be topped off should the loop require it due to thermal expansion.

Auxiliary external electric heater

External heater

Adds that little bit of extra heat on those few coldest days. Also helps to balance the system size by balancing out those few extreme days. These heaters are installed in the supply air duct outside of the unit. Mostly used on horizontal style equipment.