Revolution2 Series Two-Stage Indoor Split Geothermal System

Revolution2 bt
Revolution2
Warranty badge

Hydron Module's Split model is the next generation of geothermal innovation, incorporating best-in-class features into a compact, efficient and ultra-quiet system. The Split system is among the most versatile geothermal systems available. They can provide ducted heating and cooling, as well as domestic hot water. They can also be used with a conventional furnace to create a dual-fuel system.

Applications

Forced Air Cooling Forced Air Heating Hot Water

Features

  • 2-stage scroll compressor
  • Sound and vibration absorbing triple compressor isolation
  • Foam enclosed enhanced surface coaxial heat exchanger
  • Flow switch protection
  • Factory installed desuperheater for domestic hot water heating
  • Hinged control box for easy internal service
  • 45° rear corner post for convenient water and refrigerant connections
  • UL GREENGUARD Gold certified foam cabinet insulation
  • Rugged steel cabinet with champagne paint finish
  • Hydron Module Residential Warranty coverage

Performance Data

BS018

Cooling
Full Load BTU
20,400
EER
18.9
Part Load BTU
0
EER
0.0
Heating
Full Load BTU
14,600
COP
3.6
Part Load BTU
0
COP
0.0

BT024

Cooling
Full Load BTU
24,900
EER
17.3
Part Load BTU
20,300
EER
22.2
Heating
Full Load BTU
18,200
COP
3.4
Part Load BTU
15,400
COP
3.9

BT036

Cooling
Full Load BTU
35,300
EER
17.4
Part Load BTU
27,600
EER
26.5
Heating
Full Load BTU
28,700
COP
3.8
Part Load BTU
22,900
COP
4.3

BT048

Cooling
Full Load BTU
51,500
EER
19.9
Part Load BTU
40,500
EER
28.8
Heating
Full Load BTU
37,300
COP
3.9
Part Load BTU
30,900
COP
4.4

BT060

Cooling
Full Load BTU
62,700
EER
17.8
Part Load BTU
49,400
EER
25.7
Heating
Full Load BTU
46,200
COP
3.8
Part Load BTU
38,000
COP
4.2

BT072

Cooling
Full Load BTU
67,800
EER
16.9
Part Load BTU
55,800
EER
22.5
Heating
Full Load BTU
50,300
COP
3.4
Part Load BTU
42,600
COP
3.8

Literature

Accessories

Programmable thermostat

Programmable thermostat

Keeps the home more comfortable by operating the unit on a set schedule and temperature range. This also saves on energy costs by setting the unit back while the home is unoccupied.

Non-programmable thermostat

Non programmable thermostat

Designed to take maximum advantage of the multi-stage functionality of the unit. This allows the unit to achieve maximum savings by only operating at the right range to match the current weather.

Auxiliary internal electric heater

Internal heater

Adds that little bit of extra heat on those few coldest days. Also helps to balance the system size by balancing out those few extreme days. With a standard stab-in design, you don't have to drop the blower to install.

Auxiliary external electric heater

External heater

Adds that little bit of extra heat on those few coldest days. Also helps to balance the system size by balancing out those few extreme days. These heaters are installed in the supply air duct outside of the unit. Mostly used on horizontal style equipment.

Flow centers - pressurized

Pressurized flow center

Circulates the fluid through the unit and the geothermal loop field. These types form a completely closed system.

Flow centers - non-pressurized

Non pressure flow center

Circulates the fluid through the unit and the geothermal loop field. This type of system uses an expansion tank that can be topped off should the loop require it due to thermal expansion.

EWC zone control

Zone control

These highly sophisticated controls work with dampers in the ductwork to create multiple zones throughout the house. You can utilize one unit, but have different temperatures in each zone. The control panel controls both the unit, and the zone dampers.

Unit air pad (plastic or foam)

Air pad

The unit air pad creates a buffer between the unit and the home. This buffer prevents any vibration from the unit to be transmitted into the home which improves the already quiet operation of the unit.

Electrostatic filter (washable)

Electrostatic filter

This type of filter is a permanent media filter that can be washed from time to time as needed. This eliminates the need to buy new filters.

Electronic 24 volt air cleaner

24v electrostatic filter

This type of filter uses an electrically charged media to increase filtration performance. This improves indoor air quality by removing more particles from the airstream. This filter requires the occasional media replacement.

Disposable pleated filter

Pleated filter

This type of filter uses a pleated media to remove dust and other particles from the air stream. It is important to check these filters regularly and replace them as needed.

Air handler (DX refrigerant or hydronic)

Air handler

These multi-positional air handlers are specially matched to our split systems for maximum performance. The match also qualifies the system for the 30% U.S. federal tax credit. The air handler can be installed in remote parts of the home, or hard to reach areas where space is at a premium.

"A" coil (DX refrigerant or hydronic)

A coil

The specially matched "A" coil allows the split geothermal system to be added to an existing air handler or furnace in retrofit applications. Additionally, the "A" coil can allow the system to operate in a dual-fuel application where backup heat is supplied by a traditional furnace.

Consumer purchase plans

Purchase plan

With a wide variety of payment options and terms, our consumer payment plans make installing a geothermal system easier and more cost effective. By deferring your initial payments out, you can start enjoying your new system earlier and take time to obtain many of the various rebates and tax credits offered.